Search documentation

22 results for “vlan”
  1. NetworkRelevance
    VLAN Discovery

    Overview VLAN inventory, trunk detection and mixed-trust warnings. Documentation status This article is a concise ref…

    vlansegmentationmatched: title, summary, tags, body
  2. NetworkRelevance
    VLAN & Subnet Explorer

    Overview The VLAN & Subnet Explorer lists every VLAN and subnet observed at a site, with attached devices, switch port coun…

    networkvlansubnetmatched: title, summary, tags, body
  3. Getting StartedRelevance
    Add a Site

    Overview Sites carry WAN, VLAN and collector assignments. Create one per physical or cloud location. Documentation status This article…

    vlancollectormatched: summary, tags, body
  4. NetworkRelevance
    Topology views: L1/L2/L3, verified vs inferred

    …e same underlying graph in three layers: L1 (physical adjacency), L2 (VLAN/switching) and L3 (routed subnets), plus a combined view. Overlays re-color the same nodes for health, se…

    networktopologymatched: summary, body
  5. NetworkRelevance
    Switch Port Matrix

    Overview The Port Matrix shows every observed interface on a switch: administrative and operational status, speed, PVID, and — where resolvable — the connecte…

    networkswitchportsmatched: summary
  6. NetworkRelevance
    Topology Change History

    Overview Each topology snapshot is diffed against the previous one to produce a change record: what kind of change, what it affected, and — when a correlated…

    networkchangesmatched: summary
  7. CollectorsRelevance
    Choosing collector placement

    …reach broadcast/ARP traffic across or route into directly: a separate VLAN behind a firewall with no inter-VLAN routing, a disconnected site, or an isolated OT network. The defau…

    collectorarchitecturematched: body
  8. CollectorsRelevance
    Collector API v1 reference

    …stores the raw arrays as observations first, then derives interfaces, VLANs, addresses, routes, neighbors and forwarding entries, and finally computes graph edges labelled verified…

    collectorapienrollmentmatched: body
  9. CollectorsRelevance
    Collector 0.2.0-dev: what it collects for topology

    …e, description, MAC, type, MTU, speed, admin/operational status, PVID vlans — VLAN id and name per device ip_addresses — address, prefix length, subnet, associated interface/VLAN r…

    collectornetworktopologymatched: body
  10. IntegrationsRelevance
    Ubiquiti UniFi

    …er (UniFi Network Application or UniFi OS Console) inventory, client, VLAN and firmware state so AssurIQ can assess segmentation, firmware currency and rogue device exposure on Uni…

    integrationunifinetworkmatched: body
  11. IntegrationsRelevance
    Aruba / HPE

    …tches, controllers and Aruba Central-managed access points to collect VLAN, wireless client and configuration evidence using SNMPv3 or the Aruba Central API. Requirements For o…

    integrationarubanetworkmatched: body
  12. IntegrationsRelevance
    Cisco IOS/IOS-XE

    Purpose This integration collects running configuration, interface, VLAN and CDP neighbor data from Cisco IOS and IOS-XE switches and routers using SNMPv3 for polling and SSH for…

    integrationcisconetworksnmpmatched: body
  13. NetworkRelevance
    Configure SNMP Discovery

    …p UDP 161 closed on any interface facing the internet or an untrusted VLAN. If SNMP traps are used for anything, restrict trap destinations the same way. An ACL that is too tigh…

    snmpmatched: body
  14. NetworkRelevance
    Industry Network Intelligence Packs

    Overview A Network Intelligence Pack changes recommended overlays, VLAN/segment classification, documentation templates, deterministic risk rules and report emphasis for a custo…

    networkpackscompliancematched: body
  15. Getting StartedRelevance
    Deploy Your First Collector

    …est for Supervision Windows service Domain-joined servers, management VLANs Windows Service Control Manager Linux systemd Ubuntu, Debian or RHEL hosts already on the network system…

    collectorenrollmentmtlsmatched: body
  16. NetworkRelevance
    Troubleshoot SNMP

    …. Confirm SNMP is enabled on the device and bound to the management VLAN the collector can reach. Confirm UDP 161 is open from the collector's IP through any device ACL or upstre…

    snmptroubleshootingmatched: body
  17. SecurityRelevance
    Understanding AssurIQ Risk (CVSS vs AssurIQ Risk)

    …VSS 9.1 (Critical) EPSS 0.06 KEV No Exposure Internal only, segmented VLAN Asset criticality Standard Mitigations EDR present, network segmentation AssurIQ Risk ~40 Risk bands…

    riskcvssepsskevmatched: body
  18. IntegrationsRelevance
    pfSense

    …ollected Firewall and NAT rule configuration Interface, gateway and VLAN configuration Installed package versions and pfSense version WAN-facing service exposure Security model…

    integrationpfsensenetworkmatched: body
  19. NetworkRelevance
    The topology evidence model

    …Collectors upload raw, timestamped observation records — interfaces, VLANs, IP addresses, routes, LLDP/CDP neighbors, forwarding-table entries and subnets. AssurIQ never edits the…

    networktopologyevidencematched: body
  20. NetworkRelevance
    Customer Documentation: living, collector-verified operational docs

    …tructured records (organization, sites, contacts, network, firewalls, VLANs, servers, cloud tenants, applications, vendors, licenses, contracts, runbooks, backup, DR, policies and…

    documentationprovenancematched: body
  21. NetworkRelevance
    AssurIQ Network Analyst

    …ons to the AssurIQ objects behind it. A. Natural-language queries — VLAN carriage, reachability, recent changes, unsupported devices, path traces. B. Auto-documentation — a draft…

    networkanalystmatched: body
  22. CollectorsRelevance
    AssurIQ Endpoint Agent: capability model and EDR-ready foundation

    …ted today: host identity, open services from network scan, interfaces/VLANs/neighbors/routes. Not yet collected: services, installed software, persistence, Defender state, firewall…

    collectorarchitectureenrollmentmatched: body