Search documentation

Overview The Port Matrix shows every observed interface on a switch: administrative and operational status, speed, PVID, and — where resolvable — the connected asset and t…

Overview Scheduled config capture for firewalls and switches. Documentation status This article is a concise reference. A fully expanded guide for “Configuratio…

…ists every VLAN and subnet observed at a site, with attached devices, switch port counts, gateways, risk and compliance scope. Segment classification (from the site's industry pack…

Purpose The Aruba integration polls Aruba switches, controllers and Aruba Central-managed access points to collect VLAN, wireless client and configurati…

…. Run initial discovery Trigger collection and confirm access points, switches and clients populate. Verification Network Map shows UniFi access points and switches with model…

…tion, interface, VLAN and CDP neighbor data from Cisco IOS and IOS-XE switches and routers using SNMPv3 for polling and SSH for configuration capture. Requirements SNMPv3 enabl…

…ites, install the collector on an always-on machine close to the core switch: a server, a small-form-factor PC, or a dedicated VM. Avoid laptops that sleep or roam. Create an enr…

…f device identity, interface state, PoE budget and topology hints for switches, firewalls, wireless controllers and access points. AssurIQ supports SNMPv1, v2c and v3; SNMPv3 is st…

…licy change. Partial MIB support Some devices, particularly older switches, consumer-grade access points, and some UPS or PDU firmware, implement only a subset of standard MIBs…

…MX security appliance events (IDS/IPS, content filtering, VPN status) Switch port and wireless AP configuration Security model The API key is scoped to a Read-only administrato…

…curity boundary. If every VLAN at a site routes through the same core switch or firewall and the collector has SNMP/credentialed reach to each one, a single collector is sufficient…

…mtu, speed_bps, admin_status, oper_status, pvid, poe net_interfaces, Switch Port Matrix vlans[] id, name, source net_vlans, VLAN Explorer ip_addresses[] address, prefix_length, su…

…e underlying graph in three layers: L1 (physical adjacency), L2 (VLAN/switching) and L3 (routed subnets), plus a combined view. Overlays re-color the same nodes for health, securit…

…k/tagged-VLAN membership, STP topology, LACP/port-channel membership, switch stacking, interface utilization counters, WAN/VPN circuit detail, and vendor-specific APIs (e.g. Meraki…

…Threat Sensor / native detections native_response_actions OFF Master switch for any response execution endpoint_isolation OFF Isolate endpoint (preserves AssurIQ management connec…